Rev. 1.0
Penguin Computing
35
Figure 28: Rack Rail Kit Parts
Before mounting the system to the rack, choose how you want to place the system. Pay attention to
the airflow within the rack cooling, connector, and cabling options.
•
The installation kits come with enough system mounted rails and flat head screws to install
two systems.
•
The two system metal frames will fit into racks with from 23.6” (600mm) to 31.5” (800mm)
space between the vertical supports.
•
You may install your system in either the right or in the left part of the metal frame.
•
The following instructions apply to installation in the right part. For installation in the
frame’s left part, follow the same instructions, while replacing “right” with “left”, and vice
versa.
