INSTALLATION
MANUAL
MODEL MU-600-T
(FOR USE WITH TWISTED PAIR CATEGORY CABLE)
The MU-600-T is designed for use with the MU-600-R8 and MU-600-R16. Please refer to the MU-600-R8 or
MU-600-R16 manual for installation and operation related to the MU-600-R8 and MU-600-R16.
Reduce risk of fi re or electrical shock. NOTE: This installation should be made by
Do not expose this product to rain
a qualifi ed service person and
or moisture.
conform with local codes.
Installation: MU-600-T Transmitter-end
1)
At the camera location securely mount the transmitter unit.
2)
Find the Link cable from the head-end and make sure it is properly terminated. Connect Link cable to the
“Link Port” of the transmitter. If the head-end unit is powered up it will sense the connection to the transmitter
and turn on the power. This will be indicated by the green POWER LED on the “Network Port”.
After about 15 to 30 seconds the amber 10/100Mb LED on the “Link Port” will turn-on to tell you that the
system is connected. An Ethernet device does not need to be connected for the transmitter to communicate
with the head-end.
3)
Finally, connect an Ethernet device to the transmitter’s “Network Port”. If the device requires PoE power, the
GREEN POE OUT, LED on the “Link Port” will turn on followed by the LINK AMBER STATUS LED on the
“Network Port”. The IP camera or other Ethernet device should now be ready to operate. Continue installing
the remaining transmitters as needed.
PoE Device Power
4 pair CAT5+*
Distance
LED INDICATORS
Connector
LED
OFF
ON
FLASHING
Network
Port
Power
Link Status
Link
Port
POE Out
10/100
No Power
No Ethernet
Link
No POE
Power Out
No Link
Power
Good
Ethernet
Link Good
POE Power
Good
100Mb
10Mb
IEC/UL 60950-1
Power at PoE Port
100m
27.4 watts
200m
300m
400m
500m
27.4 watts
25.0 watts
20.0 watts
18.0 watts
* Results with ER8500 Receiver and
using 4 pair CAT5+ cable
IP Camera
Network Port
Cable from
head-end
IP Camera
Cable from
Head-end
Transmitter Hookup Diagram
Link Port
Network Port
Link Port
MU-600-T
600m
14.1 watts
MADE IN
USA