Penco Products, Inc.
•
1-800-562-1000 • Fax 800-248-1555
www.pencoproducts.com
Locker
Assembly
Instructions
Stadium
®
Assembly of Stadium Locker
All bolts are to be inserted on outside of locker while all nuts are to be placed on the inside of the locker. Each
Stadium locker is assembled as a stand-alone unit. Individual units can be joined together for placement in a row.
Part No.
86190
(Knocked Down Version)
Page 1 of 2
1. Place back panel on a pair of saw horses.
2. Bolt hooks to back panel.
3. Bolt one side panel to the inside
of a back panel flange.
4. Bolt bottom to side and back panel.
5. Bolt second side panel to bottom and to the inside
of the other back panel flange.
6. Loosely bolt shelf and rod holders to side panels and insert rod into rod holder
holes.
7. Bolt top to the inside of the side panels and to the inside of the back panel.
8. Tighten bolts that anchor shelf and rod holders (leave bolts loose if installing Security
Box).
9. Place locker frame over outside edge of side panels, bottom and top and bolt
together.
10.Stand locker upright and install on a level surface.
11. Line up number plate with holes at front of shelf and rivet into place.
All lockers must be anchored to the floor and / or wall.
See page 2 for assembly of optional Security Box and Footlocker.
(See Page 2 for Optional Security Box & Footlocker)
View of locker
with back on floor
or saw horses.
Page 1 of 2
Optional
Security
Box
Optional
Footlocker
Bottom
Back
Panel
Hooks
Top
Rod Holder
Rod
Locker
Frame
Side Panel
Side Panel
Shelf
Number
Plate
Back Panel
Flanges
