PenBits PK017 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 66

PenBits PK017 Скачать руководство пользователя страница 10

Cut the spring slightly overlength and file the
cut end flat using the armature as a support
and length gauge.

Little beauties. Results improve with practice -
all very therapeutic!

Warranties

The  procedures  described  in  our  instructions  require  the  proprietary  locomotive  to  be
dismantled and  some of  its  components  to  be  modified.  The  manufacturer's  warranty  will
almost  certainly  be  rendered void  by  carrying  out  the  modifications.  The  user  should
ensure that the locomotive is free running and has no warranty issues before commencing
work.

Please follow the manufacturer's instructions for the dismantling of the locomotive.

Our  instructions  guide  you  in  making  modifications  to  components  of  the  locomotive  and
fitting the kit. The modifications, the kit and the instructions have been tested by the kit
designer  and  others  to  confirm  that  they  are  practical, serviceable  and,  when  used  as
intended,  produce  a  working  locomotive  whose  performance  will  bring much  pleasure.
However, as the fitting of the kit by the user is out of our direct control, we can make no
warranty, expressed  or  implied,  as  to  the  performance  and  continued  serviceability of  the
locomotive following modification.

General Notes

10/65

(c) PenBits Model Railways, All Rights Reserved

27/09/2021

«
...
8
9
10
11
12
...
»

Содержание PK017



































































Отзывы:

Нет отзывов