background image

PelPro Pellet Stove  •  8104-171B  •  10/21

PelPro Pellet Stove  •  8104-171B  •  10/21

pelprostoves.com

pelprostoves.com

14

15

Using Y

our 

Stove

Using Y

our 

Stove

Using Your Stove

Fuel Material and Fuel Storage

Pellet fuel quality can greatly fluctuate. We recommend that you buy fuel in multi-ton lots 

whenever possible. However, we do recommend trying various brands before purchasing 

multi-ton lots to ensure your satisfaction. Store fuel in dry location not within clearances to 

combustibles of your Stove.

Fuel Material

•  Made from sawdust or wood by-products

•  Depending on the source material it may have a high or low ash content.

Higher Ash Content Material 

•  Hardwoods with a high mineral content

•  Fuel that contains bark

•  Standard grade pellets or high ash pellets

Lower Ash Content Material

•  Most softwoods

•  Fuels with low mineral content

•   Most premium grade pellets

Fuel Tips

Pro Tip

We recommend the use of Pellet Fuels Institute certified pellet fuel with this product.

Your Stove has a manufacture-set minimum low burn rate that must not be altered. It is 

against federal regulations to alter this setting or otherwise operate your Stove in a manner 

inconsistent with operation instructions in this manual.

Using Your Stove

What to Expect 

1

   Combustion blower will turn on 

2

   Igniter will turn on 

3

   Pellets will drop, smoke may occur in firebox but will evacuate, 

and flame will appear in fire pot.

4

   Convection blower will automatically turn on after the Stove 

heats up. Convection blower will continue to run even after your 

Stove has been shut down.  

Pro Tips 

•  Odors and vapors are released during initial startup after purchase; burning your Stove on 

HI for 30 minutes will allow the paint to cure. Open windows or doors for air circulation 

until burn off is complete. 

•  During start up and normal operation your Stove’s front door must be closed

• 

Priming is only required the first time your Stove is lit, or after a FUEL FEED ALARM.

Starting your Stove the first time

1

2

4

3

 WARNING!

Fire Risk

Keep combustible materials, gasoline and other flammable vapors and liquids clear of Stove.

• 

Do NOT operate Stove with door open

• 

Do NOT operate Stove with fire pot floor open

• 

Do NOT store flammable materials in the Stove’s vicinity

• 

Do NOT use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids or gels to start or 

“freshen up” a fire in this Stove

Keep all such liquids well away from the Stove while it is in use as combustible materials may ignite.

 WARNING!

HOT SURFACES! 

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

• 

Do not touch glass until it is cooled

• 

NEVER allow children to touch glass

• 

Keep children away

• 

CAREFULLY SUPERVISE children in same room as fireplace

• 

Alert children and adults to hazards of high temperatures

• 

High temperatures may ignite clothing or other flammable materials

• 

Keep clothing, furniture, draperies and other flammable materials away

Содержание PP150
























Отзывы: