18
19
|
SETTING UP YOUR TREAD
SETTING UP YOUR TREAD
CONTINUED
LEVELING
y
If the Tread rocks or wobbles, stabilize it by adjusting the back feet.
y
Use a 27mm wrench or an adjustable wrench to loosen the nut at the top of
each back leg.
y
Turn one or both feet clockwise until all feet rest firmly on the ground.
y
Tighten the locking nuts.
MOVING THE TREAD
y
Make sure to power down and unplug the Tread before moving it.
y
One person stands at front, holding the handrail.
y
One person lifts from the back.
y
Tilt the Tread forward.
y
Slowly and carefully roll the Tread backwards or forwards.
For more information on transporting the Tread to a new location, contact
member support.
STORAGE
y
Store the Tread in a dry, indoor area.
y
Remove the Safety Key and store it in a separate location when the Tread is not in use.
y
To reattach the Safety Key, fit the magnet into the notch under the center button. Wrap
the cord around the cleat twice and place the clip on the magnet.
CAUTION
: Do not attempt to move the Tread with fewer than two people.
PLUGGING IN AND POWERING ON
y
Plug in the power cord.
y
Switch the Tread on.
y
Press the center button to wake the Tread.
POWERING OFF
y
Press and hold the center button.
y
Switch the Tread off.
ADJUSTING THE TOUCHSCREEN
y
Hold the top and bottom of the screen and tilt back or forward.
y
You should be able to look at the screen comfortably from the center of the deck.
