pellenc Olivion P230, Руководство по эксплуатации

Страница: 19 / 32

OLIVE HARVESTING SHAKER RAKE "OLIVION P230 / T220-300"
48_80300-M
5.3. OPERATING TIPS
1. Grasp the tool holding the ball end cap with one
hand and the pole with the other.
2. Introduce the rake into the foliage.
3. Stop the shaking action once the olives are on the
ground.
Warning
• Never start the tool with the vibra-
tion rake already in the foliage.
• Never operate the tool for extended
periods outside the foliage.
• Always switch off the picker when
transiting from one branch to an-
other or from one tree to another.
• Do leave the battery lying out in the
sun.
48N_19_016
Important
• Becoming familiar with the OLIVION tool entails several hours practice and adaptation of the harvesting
system (wide nets).
• It is preferable to start from the inside and work outwards to avoid stepping on the fallen olives.
• Start harvesting at the root of the branch and work towards its tip (in the direction of the foliage) to optimize
the drop pattern of the olives.
• Do not hesitate to change the position of the rake in the foliage (see Section 4.4, “Adjusting the orientation
of the shaker rake”).
• Do not grip the tool too tightly in order to minimize the vibrations transmitted to the upper arms, and to lessen
the working fatigue.
• If the tool experiences a sudden jolt in the foliage, it may go to safe mode and stop.
• To restart, turn the tool off and on again by pressing the On/Off switch on the battery
19