pellenc FIXION 2, Руководство по эксплуатации

Страница: 20 / 48

TYING MACHINE FIXION 2
29_133084-G
3. Start the tying machine (see Section 5.1, “Tying ma-
chine on/off”).
4. Press the trigger (19) (a single press) to push the tie
through to the hook (12).
5. Check that no scrap of tie cord remains trapped in
the twister (18), do a practice tie test it, and remove
this tie afterwards.
5.6. GRIP
It takes a few hours handling to become familiar with the tying machine. The tying process is not automatic. To
ensure your tool is working properly, and you are comfortable with it, always comply with the following conditions:
• When you use the large tie band spool, keep the assemblies properly aligned: dispenser / ties / tying machine.
• When you use the small tie band spool, check that the tie cord has been properly inserted into the intake opening
of the tying machine.
Important
The tie cord must not be caught up at the tying machine intake.
Warning
Avoid any malfunction by making sure the tie cord is not bent at the tying machine intake opening.
The tying machine must be used at a temperature of between -5° and +35°C.
20