pellenc EXCELION 2 LH, Руководство пользователя и инструкции по эксплуатации

Страница: 60 / 84

BRUSH CUTTER EXCELION 2 LH
53_154421-A
6. SERVICE
6.1. MAINTENANCE ADVICE
Caution
Always disconnect the tool battery before starting tool maintenance.
• Use products recommended by PELLENC.
• In the event of any problem, consult an authorised PELLENC distributor.
6.2. MAINTENANCE TABLE
Maintenance task
At each
start-up
Every
two
hours
Every 50
hours
Every
month
After
each use
Every
year or
as nec-
essary
Cleaning the Brush cutter Excelion 2 LH (do
not clean with a high pressure water but in-
stead by blowing or brushing)
X
Visual verification of the machine's safety de-
vices (carrying plate, safety guard, angle gear)
X X
Visual check of the air exhaust screen and the
air intake screen which must not be obstructed
X
Functional check of the safety throttle X
Sharpening verification and re-sharpening if
necessary
X X X
Visual inspection of the cutting tool (no cracks
or deformation)
X X X
Visual inspection of the cutting tool's attach-
ment to the shaft (absence of distortion or
wear and tear)
X X X
Check the level of wear on the teeth of the ser-
rated blade and sharpen if necessary or re-
place the serrated blade
X X X
Check the battery level X
Machine check by an approved PELLENC
dealer
X
Angle gear lubrication X
Visual check of the protective casing X X X
Visual check of the distancing bar X X X
Lubrification of the CITY CUT blades X
Cleaning the CITY CUT blades X
Greasing the angle gear of the CITY CUT X
Important
Have the machine serviced every 400 hours or at least once a year by an authorised PELLENC distributor.
60