pellenc EXCELION 2 LH, Руководство пользователя и инструкции по эксплуатации

Страница: 55 / 84

BRUSH CUTTER EXCELION 2 LH
53_154421-A
5.6. TIPS FOR USE AND WORKING TECHNIQUES
5.6.1. CHOICE OF THE RIGHT CUTTING HEAD ACCORDING TO THE USE
Whether you want to clean or beautify your green space, remove tall grass, wild shoots, thickets or bushes cluttering
up a path, for each use of your Brush cutter Excelion 2 LH, there are a suitable PELLENC cutting head. It is therefore
important to choose the right cutting head according to the intended job.
-
5.6.1.1. TAP CUT 2 AND 3 CUTTING HEADS
• They are ideal for mowing and edge trimming.
• They are mainly used in cases where the wear of the
strimmer wire is significant (edge of wall, along fences,
etc.).
Choice of strimmer wire
• For grass: use PELLENC ELECTRIC Ø 2.4 mm strim-
mer wire (reference 159893).
• For dense grass and brush: use PELLENC ELECTRIC
strimmer wire Ø 2.7 mm (reference 159892).
-
5.6.1.2. WEED CONTROL BLADES AND MULCHING BLADES
These accessories have been specially designed for mowing/strimming brush, tall grass, woody vegetation and
even shrubs.
Your tool is compatible with several special "large brush clearing" accessories.
Choice of accessory
A. For dense grass and brush: use a Ø 320 mm twin-
blade (reference 158490) or a Ø 320 mm tri-blade
(reference 158489).
B. To cut and slash woody vegetation, dense brush or
thorny vegetation: use a mulching blade (reference
158491) + a mulching kit (reference 57277).
C. For cutting shrubs, shoots or coppices: use the saw-
ing kit (reference 57275 with the chisel-tooth saw
blade (reference 111700)).
55