pellenc EXCELION 2 LH, Руководство пользователя и инструкции по эксплуатации

Страница: 47 / 84

BRUSH CUTTER EXCELION 2 LH
53_154421-A
Note
If you exit the menu with the trigger, the screen dis-
plays "RELEASE TRIGGER".
5.5.2. ACTIVATION OF THE CUTTING HEAD VIA THE HMI MENU
Selecting the right cutting head is essential to the proper functioning of your brush cutter.
On receipt of your machine, the "TAP CUT" mode is activated by default.
To work with cutting heads on the market or with strimmer wire, activate the "TAP CUT" mode. For work with a
blade, activate the "BLADE" mode.
3 choices are available to the user:
• 1 CITYCUT Only speeds 1 and 2 are available. The "CITY CUT mode flashes during work and when stopped
to remind the user that the mode is active.
• 2: TAP CUT
• 3: BLADE
Note
1. Only the "CITY CUT" mode flashes on the home screen. The other modes, although selected, will not be
visible on the home screen during work or shutdown. When entering the menu, the first displayed mode
is the selected mode.
2. Whatever mode is selected, it remains saved for the next start.
1. Access the tool menu (refer to Section 5.5.1,
“Browsing in the menu”).
2. Click several times on the POWER / MENU button
(9) so as to scroll through the different cutting heads
available on the tool.
3. Press and hold on the POWER / MENU button (9)
to select the cutting head fitted on the tool.
Once selected, the cutting head will be displayed in
the middle part of the screen and the text will freeze.
47