pellenc EXCELION 2 LH, Руководство пользователя и инструкции по эксплуатации

Страница: 39 / 84

BRUSH CUTTER EXCELION 2 LH
53_154421-A
4. Clip the carabiner of the carrying strap (20) into the
carrying ring (7).
5. Adjust the carrying strap to obtain the best balance
of the tool.
Note
The tool carrying strap has an emergency release system. For more information, refer to Section 5.7, “Emer-
gency release”.
4.8.2. MOVEMENT OF THE CARRIER RING ACCORDING TO THE CENTRE OF GRAVITY
1. Unscrew the screw located on the carrying ring (7).
2. Slide the carrier ring over the transmission shaft.
Choose a position which allows you to obtain the
best balance of the tool (weight distribution between
front and rear and machine balanced horizontally).
3. Replace the screw previously removed on the car-
rying ring to lock the position of the latter.
Note
The balancing of the machine depends on the size
of the user and the cutting tool used.
4.8.3. ADJUSTING THE POSITION OF THE ROUND HANDLE AND THE DISTANCING BAR
These adjustments help adjust the position of the round handle and the distancing bar according to the morphology
of the user.
39