pellenc EXCELION 2 LH, Руководство пользователя и инструкции по эксплуатации

Страница: 16 / 84

BRUSH CUTTER EXCELION 2 LH
53_154421-A
3.2.2. CHARGERS AND BATTERIES COMPATIBILITY
Battery Charger Remarks
ALPHA 520 CB5022 ; CB5022HV *with adapter cord ref. 57248
ULIB 750 CB5022; CB5022HV *with adapter cord ref. 57238
3.2.3. VIBRATION AND NOISE EMISSION VALUES
The determination of noise levels and vibration rates is based on operating conditions at maximum rated speed
according to a standardised test method. It can be used to compare two machines.
Sound pressure values
Maximum sound pressure level at the user's position (Uncertainty K
pA
: 1.5 dB
(A))
L
pA
= 80 dB(A)
Peak sound pressure level at the user's position L
pC
< 130 dB(C)
Sound power values
Measured sound power level L
WA
(uncertainty K
WA
: 2 dB(A)) 94 dB(A)
Guaranteed sound power level L
WAg
96 dB(A)
The measured sound power level and the guaranteed sound power level were measured on a brush cutter with
a metal twin-blade tool.
The measured sound level and the guaranteed sound power level were measured according to a procedure in
accordance with Directive 2000/14 / EC Annex V.
Vibration values
Vibration values measured at maximum rated speed*
a
h
value of the right han-
dle measured in m/s²
a
h
value of the left han-
dle measured in m/s²
TAP CUT 3 (strimmer wire Ø 2.7 mm) 3.32 3.77
TAP CUT 2 (strimmer wire Ø 2.7 mm) 3.29 3.37
Twin-blade 3.27 3.44
Tri-blade 2.91 3.92
Mulching 3.99 4.23
Chisel-tooth saw 2.63 3.92
CITY CUT 1.90 2.39
*Measurement uncertainty: KWA = 2 m/s²
The total declared values for vibration and noise emissions can be used for a preliminary exposure assessment.
Caution
Vibrations during actual working use of the machine may differ from the total declared value, depending on
the way the machine is used
It is necessary to identify safety measures to protect the operator, based on an estimate of exposure under
actual operating conditions (taking into account all parts of the operating cycle, such as the time the machine
is switched off and the time it is idling, in addition to the working time).
16