pellenc AIRION BP, Перевод оригинального руководства, Страница: 18 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
-
4.4.2.2. FITTING THE ALPHA 520 BATTERY ON THE TOOL
Fit the battery on the tool, refer to the battery operating instructions manual.
4.5. DISCONNECTING THE BATTERY
4.5.1. DISCONNECTING THE PELLENC 750 / 1200 / 1500 BATTERY
1. Switch off the tool (refer to Section 5.1.2, “Stopping
the tool”) or switch off the battery.
2. Unscrew the safety ring located on the tool connec-
tor (8).
3. Remove the connector (8) from the battery.
4. Remove the battery, refer to the operating instruc-
tions manual of the battery concerned.
4.5.2. DISCONNECTING THE ALPHA 520 BATTERY
1. Switch off the tool (refer to Section 5.1.2, “Stopping the tool”) or switch off the battery.
2. Remove the battery, refer to the operating instructions manual of the battery.
4.6. ADJUSTING THE HARNESS
Caution
The adjustment of the harness ensures the working comfort of the user of the Airion BP. It must
be adjusted before each use of the tool.
All of the harness adjustment steps below allow the user to find their own point of comfort. This
is why the harness adjustment is personal and specific to each user of the tool.
1. Put the harness (1) on your back.
The adjustment straps must be loose so as not to
inhibit the user in his adjustment.
2. Lightly jump the harness on your shoulders to put it
in place.
3. Move the nozzle to the right to gain freedom of
movement.
18