pellenc AIRION BP, Перевод оригинального руководства, Страница: 15 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
4. COMMISSIONING
4.1. CONTENTS OF THE KIT
Check that the Backpack blower Airion BP is delivered with:
• 1 short auxiliary nozzle (21)
• 1 long auxiliary nozzle (22)
• 1 round nozzle tip (26)
• 1 tool bag containing a tightening clamp, a Ø 5 x 25
mm screw and 1 TORX 25 wrench
• 1 Operating instructions manual
4.2. FITTING THE AUXILIARY NOZZLE ONTO THE TOOL
1. Fit the auxiliary nozzle (4) up to the stop in the
groove located under the casing of the tool, taking
care to align the foolproof keys.
2. Install the tightening clamp (5) on the tube (4).
3. In order to lock the clamp (5), tighten the screw using
the TORX wrench supplied with your tool.
4.3. FITTING / REMOVING AUXILIARY NOZZLE AND NOZZLE TIPS
4.3.1. FITTING / REMOVING AUXILIARY NOZZLES
Depending on the user's size and the use of the tool, choose the appropriate auxiliary nozzle to be mounted on the
tool (short or long). Refer to Section 5.6, “Tips for use and working techniques”.
15