pellenc 58W00001, Руководство по эксплуатации

Страница: 32 / 48

SOIL CULTIVATOR CULTIVION ALPHA
58_163161-A
6.6. SHARPENING THE WORK TOOL
Sharpen the working tool lightly but often using a flat file.
Regularly check how sharp the blades are for the first few
hours to determine the required frequency of sharpening.
Ensure the blade is at a 45° angle during sharpening.
6.7. CHANGING THE WORK TOOL ATTACHMENT
1. Remove the assembly: tightening screw (29), wash-
er (28) and nut (27) using a 5 mm hex. wrench.
2. Remove the tool head attachment from the shaft.
Important
Be careful not to lose the nut (27) and washer
(28).
3. Remove the clamping screws (24) using a 5 mm hex
wrench.
4. Keep the two nuts (22) present on the blade mount-
ing part (23).
5. Remove the blade (11).
Important
Never work with the clamping screws (24) not
tightened.
32