pellenc 58W00001, Руководство по эксплуатации

Страница: 16 / 48

SOIL CULTIVATOR CULTIVION ALPHA
58_163161-A
4.2.2. FITTING THE BLADE MOUNTING ASSEMBLY ONTO THE TOOL
1. Once fitted together, position the blade mounting as-
sembly (13) on the output shaft (25), aligning the
mark on the blade mounting part (23) with the "0"
mark on the protective casing (26).
Note
The head of the machine has a graduated rotating
shaft from -4 to +4, passing through a 0 position.
For further information on how to adjust the work
tool position, see pages Section 5.7, “Adjusting the
tool head tilting positions”.
2. Place the nut (27) in the recess position provided on
the blade mounting part (23).
Important
Check the mounting direction of the nuts, the
domed part must face outwards.
3. Fit the washer (28) and screw (29).
4. Tighten the screw (29) using a 5 mm hex socket and
a torque wrench.
Important
Tightening torque: 12 N.m.
Important
Do not forget the nut (27) and the washer (28) during assembly.
Important
Never work with the clamping screws (24) not tightened.
16