background image

READ ME!

• 

CASE MUST BE CENTERED LEFT-TO-RIGHT IN THE PICKUP BED FOR CORRECT AND SECURE MOUNTING, AND REQUIRES BOTH MOUNTS. 

• 

CASE IS USUALLY PLACED AT FRONT OF BED NEAR WALL, BUT MAY BE POSITIONED WHERE DESIRED, AS BED RAILS AND WHEEL-WELLS PERMIT. 

• 

CHECK THAT POSITION OF CASE ALLOWS OPENING OF LID WITHOUT INTERFERENCE.  

• 

CHECK THAT CASE POSITION WITH OPEN LID DOES NOT ALLOW CONTACT BETWEEN CASE LATCHES AND REAR WINDOW.

THANK YOU FOR PURCHASING A PELICAN™ CARGO CROSS-BED MOUNTING KIT, FOR A TOYOTA™ RAIL STYLE TRUCK BED. BEFORE YOU START, 

TAKE A MOMENT TO FAMILIARIZE YOURSELF WITH THE FITTING INSTRUCTIONS AND THE COMPONENTS RECEIVED. REFER TO PAGE 2 FOR A 

LIST OF ALL THE COMPONENTS, QUANTITIES AND TOOLS REQUIRED. 

SINCE 197

6

CARGO CROSS-BED MOUNTING KIT

TOYOTA™ RAIL

Pelican Products, Inc. (“Pelican”) guarantees its Pelican™ Cargo cases for a lifetime against breakage or defects in workmanship. This 

lifetime warranty does not cover mounting hardware, which Pelican warrants against defects in materials and workmanship for three years 

from the date of purchase. To the extent permitted by law, Pelican’s liability is limited to the case and not its contents and in no event shall 

Pelican’s liability to the purchaser for damages exceed the purchase price of the case in respect of which damages are claimed.

TO THE EXTENT PERMITTED BY LAW: (A) THIS WARRANTY IS IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT 

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE; (B) ALL OTHER IMPLIED 

WARRANTIES AND ANY LIABILITY NOT BASED UPON CONTRACT ARE HEREBY DISCLAIMED AND EXCLUDED; AND (C) IN NO EVENT SHALL 

PELICAN BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES, REGARDLESS OF 

WHETHER A CLAIM FOR SUCH DAMAGES IS BASED ON WARRANTY, CONTRACT, NEGLIGENCE OR OTHERWISE .

With valid dated proof of purchase, Pelican will either repair or replace any broken or defective product, at our sole option. Certain products 

are available for a limited time only.  If a claim is made involving one of these products, Pelican reserves the right to replace a broken or 

defective product with a standard Pelican product of comparable size and quality if no comparable limited edition product is available at the 

time of a claim. TO THE EXTENT PERMITTED BY LAW, THIS SHALL BE THE SOLE AND EXCLUSIVE REMEDY OF THE PURCHASER.

To make a warranty claim, the purchaser must complete the warranty claim form at https://www.pelican.com/us/en/support/warranty/. Any 

warranty claims shall be made by the purchaser as soon as practicable and, with respect to the mounts and related hardware, no later than 

three years from the date of purchase. The purchaser must provide valid dated proof of purchase and obtain a return authorization number from 

Pelican Customer Service prior to returning any product, and is responsible for paying for all warranty freight costs. If Pelican determines that 

any returned product is not defective, within the terms of this warranty, the purchaser shall pay Pelican all costs of handling, return freight and 

repairs at Pelican’s prevailing rates.

This warranty does not cover normal wear and tear including but not limited to scratches, dents or tears, aesthetic surface damage which may 

be caused by oxidation or by the natural breakdown of colors caused by exposure to the elements. All warranty claims of any nature are barred 

if the product has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident.

Some states and countries do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or 

consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may 

have other rights which vary from state to state and country to country.

In Australia: The benefits provided to you under this warranty are in addition to your rights and remedies as a consumer under the Australian 

Consumer Law as contained in the Competition and Consumer Act 2010 (Cth) (“the Act”). Nothing in this warranty limits the rights or 

obligations of a party under the Act in relation to the supply to consumers of goods which cannot be limited, modified or excluded. If 

applicable, our goods come with guarantees that cannot be excluded under the Act. Consumers are entitled to a replacement or refund for a 

major failure and compensation for any other reasonably foreseeable loss or damage. Consumers are also entitled to have the goods repaired 

or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you are not a consumer under 

the Act, then your rights may be limited. To make a warranty claim, the purchaser may contact Pelican Products Australia, Suite 2.33, West 

Wing, Platinum Bldg., Erina NSW 2250, Tel: +612 4367 7022, or email: [email protected]. Any claims should be made as soon as 

practicable. To expedite claims, the purchaser should obtain a return authorization number from Pelican Customer Service prior to returning 

any product.  The purchaser is responsible for paying for all freight costs. If Pelican determines that any returned product is not defective, 

within the terms of this warranty or the Act, the purchaser may pay Pelican all costs of handling, return freight and repairs at Pelican’s 

prevailing rates. In the event that Pelican determines that any returned product is defective, within the terms of this warranty or the Act, 

Pelican shall pay the purchaser all reasonable costs of the purchaser in making a claim under this warranty.

Lifetime warranty does not cover Vault by Pelican or Roto Molded cases or fabric portion of backpacks.

PELICAN™ CARGO CASES AND MOUNTS   

LIMITED LIFETIME WARRANT Y (CASES) AND THREE YEAR WARRANT Y (MOUNTS) 

SINCE 197

6

CROSS-BED MOUNTING KIT

TOYOTA™ RAIL

PELICAN PRODUCTS, INC. 

23215 Early Avenue, Torrance, CA 90505  

Pelican.com • 310.326.4700

IMPORTANT WARNING!

LATCHES AND MOUNTING KIT CARE

It is critical that the Pelican™ Cargo Mounts and Cases be properly installed and securely attached to your vehicle. Failure to properly secure 

the mounts and cases to your vehicle could result in serious injury and even death. You are responsible for the fitment of the mounts and Cargo 

Cases to your vehicle. You must therefore periodically inspect the equipment for wear and damage. Replace if in doubt. If you have limited 

mechanical experience you should not attempt to install the equipment. You should have the equipment installed by a professional installer 

if you have any doubts about your abilities. 

It is imperative that the user check the security of the cases to the vehicle after an initial brief period of driving and adjust if required. 

Pelican recommends the user do so periodically and, if road conditions change (i.e. freeway to dirt road) again check the security of the 

attachment of the Case to the vehicle.

Periodically check the latches and mounting hardware to ensure there are no loose parts. Continual exposure to daylight may cause the black hardware 

finish to dull. To maintain the gloss finish, occasionally apply a light coat of UV protectant. After exposure to salty coastal climates or snowy regions, 

rinse off the mounts with water to remove salt deposits. To help prevent corrosion, apply a silicone-based oil or spray to nuts and bolts.

©2020 Pelican Products, Inc. Part No. XBDMT5-001B-BLK  Rev. A  5-32019 

Toyota is a trademark of Toyota Motor Sales, U.S.A., Inc. All other trademarks are registered and/or unregistered trademarks 

of Pelican Products, Inc., its subsidiaries and/or affiliates. For warranty details go to www.pelican.com/warranty

Содержание XBDMT5-001B-BLK

Страница 1: ...ply to you This warranty gives you specific legal rights and you may have other rights which vary from state to state and country to country In Australia The benefits provided to you under this warranty are in addition to your rights and remedies as a consumer under the Australian Consumer Law as contained in the Competition and Consumer Act 2010 Cth the Act Nothing in this warranty limits the rig...

Страница 2: ... 2 12 NUT PLATE 4 13 NYLON RETAINER WASHER 8 14 M10 NYLON FLAT WASHER 4 Tools not included 1 13 12 3 14 10 4 1 2 11 6 5 7 9 8 REPEAT WITH INSTALLATION OF MOUNT ON OPPOSITE SIDE OF CASE AND TRUCK BED MAKE SURE CASE IS CENTERED LEFT TO RIGHT IN TRUCK BED THEN FIRMLY TIGHTEN LOCK NUTS ON BOTH LOWER MOUNTS FOR THEFT PREVENTION SECURE R CLIP TO CASE CLAMP WITH PADLOCK NOT INCLUDED ON ONE OR BOTH SIDES ...

Страница 3: ... OF MOUNT THIS ALLOWS SWINGING OF MOUNTS OUT OF WAY WHEN INSTALLING REMOVING CASE FROM TRUCK REPEAT FOR SECOND MOUNT ASSEMBLY 3 1 M8 X 16 CARRIAGE BOLTS CHECK THAT LATCHES ON OPEN LID DO NOT CONTACT REAR WINDOW OF TRUCK CAB M8 LOCK NUTS M10 NYLON FLAT WASHERS M10 X 25 BUTTON HEAD BOLTS M10 X 25 LOCK NUTS UPPER MOUNT BRACKET EARS LOWER MOUNT UPPER MOUNT EARS SLIDE PAIR OF NUT PLATE ASSEMBLIES INTO ...

Страница 4: ...4 8 M8 LOCK NUTS 5 R CLIP CLEVIS PIN 2 CASE PLATE CLAMP INSTALLATION INSTALL CASE PLATE CLAMP TO TIEDOWN PLATE SLIDE CASE PLATE CLAMP UPWARDS ON TIEDOWN PLATE SO U SHAPED SLOT ENCLOSES PLATE CENTER CLAMP LEFT TO RIGHT TO ALIGN SCREW HOLES WITH PLATE SLOTS FIT TWO M5 X 16 SCREWS THROUGH SLOTS INTO THREADED HOLES AT REAR WALL OF CLAMP KEEP CLAMP VERTICAL AS SHOWN WHILE TIGHTENING SCREWS TO FIRMLY SE...

Отзывы: