PRX1 Mounting and Assembly
The PRX1 is a battery operated remote wireless accessory for use with a single Pelican
thermostat. The PRX1 provides one of two functions:
1. Detect the current position of a door or window and wirelessly notify a Pelican thermostat.
2. Connect to the dry contact output of an occupancy sensor and wirelessly report when a space
is occupied or unoccupied to a Pelican thermostat.
!
!
Failure to follow these instructions can damage the product or cause a hazardous condition. Disconnect
power during the installation of this product. All wiring must conform to local codes and ordinances. We
strongly recommend that any installation or servicing be performed by a qualified individual.
Door/Window Sensor or Occupancy Input / PRX1
2. Line up the Top Cover with the base and
snap into place.
3. Install two AA batteries (included) by sliding
them into the unit. NOTE: Make sure the
battery polarity matches the "+" and "-"
indicators on the base.
4. Slide the battery door into place.
WARNING
!
WARNING
!
NEVER INSTALL THE PRX1 IN A METAL ENCLOSURE. WIRELESS SIGNALS
CANNOT COMMUNICATE THROUGH METAL.
1. Mount the base in the desired location using
screws in the two mounting holes.
Installation Guide
