pela tools 506799, Руководство пользователя

Страница: 21 / 36

Features
• Digital display.
• Different programs for clamp weights and
adhesive weights.
• Intelligent self-calibration.
• Automatic troubleshooting and protection
function.
• Suitable for different types of steel and
aluminum rims.
The workplace
• There must be sufficient space around the
machine to facilitate use.
• Keep the work area clean, dry and well lit.
• Cluttered, damp and dark workplaces invite
accidents and injuries.
• Keep children and spectators at a safe
distance from the machine. Children should
definitely NOT use the machine or stay inside
work area.
• Check that there are no dangerous situations
occurs when working with the machine, that
the work area around the machine is free of
objects that could possibly pose a danger, and
that there is no oil (or other sticky material) on
the floor that could pose a danger to the user.
• Stop the machine immediately in the event of
uneven operation and call our workshop (tel.
033-20 26 50) or by email
order@pelatools.com.
Personal safety
• Only qualified persons with good education and
knowledge of the function of the machine may
use it.
• Wear a dust mask and goggles, as well as
suitable work clothes, safety shoes and work
gloves that are suitable for this type of work.
• Do not wear loose clothing and do not wear
jewelry.
• Use hair nets if you have long hair. Be sure
to keep hair, clothing and gloves away from
moving parts. Loose clothing, jewelry and long
hair can get caught in moving parts.
• Attention. Look at what you are working on and
use common sense when using the machine.
• Do not use the machine if you are tired or under
the influence of drugs, alcohol or medicines. A
moment of distraction can be enough to
seriously injure you.
The structure of the machine
• The machine consists of two main parts
electricity and mechanics.
• The mechanical part is built with a fixed and a
moving part which is then mounted in a frame.
• The electrical parts consist of:
- Micro data system and control panel
- Automatic measurement of distance and
wheel diameter
- Two-phase asynchronous motor
- Horizontal and vertical pressure sensor
- Protective hood
Assembly of the machine
Open the box and check that there is no damage to
the machine. Check that all these accessories are
included in the delivery:
Balance axis
1pc
Wheel weight bar 1pc
Allen key 1pc
Wheel width gauge 1pc
Quick lock nut 1pc
Cones 1set
Balancing weight 100g
Protective cover 1pc
The machine may only be lifted under the angled
floor plate. Never lift the machine in the balance
shaft / spindle, the wheel guard or accessory
washer.
We recommend that you attach the machine to the
floor, otherwise the measurement results may be
incorrect. Use the holes located on the machine’s
angled floorboard.
Make sure there is 50 cm of free space around the
machine.
Check that the machine is firmly against the ground
at the installation site.
Assemble the tube frame and the two parts for the
wheel cover, then screw the cover on the balancing
machine with a bolt M10 x 65 mm.