2
SPECIFICATIONS
Model
PY-C4B39R
RMS Power @ 13.8 VDC
Power @ 4 Ohms 60W x 4
Power @ 2 Ohms 90W x 4
Bridged Power @ 4 Ohm 150W x 2
Min. Speaker Impedance 2 Ohm
THD Distortion 0.2%
IMD Distortion 0.2%
Frequency Response 20Hz~20KHz
Input Sensitivity 200mV~6V
Input Impedance 15K
Signal-to-Noise Ratio 90 dB
Channel Separation 50 dB
Remote gain Control 0.25V~+6V
Crossover Network
Low Pass Filter 50Hz~300Hz
Bass Boost 0dB~+12dB
High Pass Filter 50Hz~300Hz
Fuse Rating 25A x 2
Size Lx W x H 350 x 242 x 52mm
Connect to chassis
ground of vehicle*
Connect to +12Vof battery with
appropriate FUSE value.
Connect to remote
turn-on lead of
source unit.
CD PLAYER
SEL
ELECTRICAL CONNECTION
13
+12V
Anode of power connection terminals. Connect to the anode of car battery.
REM
Terminal to be connected with Remote cable, which comes from the source and which
controls the amplifier switching on. Applied voltage must be between 7 and 15 VDC.
GND
Ground terminal. Connect to the car chassis. Keep the length of the ground cable
to a minimum.