Peg-Perego Pliko P3 Modular System On Track, Инструкция по эксплуатации

Страница: 24 / 88

• IMPORTANT: Carefully read instructions and keep for
future use.
The child’s safety could be put at risk if the instructions are
not followed.
• PEG PEREGO reserves the right to make any necessary changes
or improvements to the products shown at any time without
notice.
Peg Perego S.p.A. is an ISO 9001 certified company.
The fact that we are certified provides a guarantee
of our honesty for our customers, and fosters trust
in the company’s way of working.
CUSTOMER SERVICE
If parts of the model are accidentally lost or damaged, use only
original Peg Perego spare parts. Contact the Peg Perego Customer
Service for all repair work, replacements, information about
products, and sale of original spare parts and accessories, at the
following:
tel.: 0039-039-60.88.213
fax: 0039-039-33.09.992
e-mail: assistenza@pegperego.it,
www.pegperego.com
Peg Perego is at the consumer's service, meeting every need in
the best way possible. This is why our customers' opinions are so
important and valuable to us. We would be very grateful if you
would kindly fill in the CUSTOMER SATISFACTION QUESTIONNAIRE
after using one of our products. You will find the questionnaire on
the Internet at www.pegperego.com
Please note any observations or suggestions you may have on the
questionnaire.
PLIKO P3
• With its removable backrest, Pliko P3 can be used as a chassis
or a stroller.
INSTRUCTIONS FOR USE
OPENING THE CHASSIS
1• Before opening the chassis, remove the two safety caps
from the hooks as shown in the figure, otherwise it will be
impossible to open it correctly.
2• To open the chassis, pull the two levers on the handlebars
upwards, as shown in the figure.
3• While pulling upward on the levers, lift the chassis and it will
automatically open.
Check the two side hooks (see figure) to make sure the stroller
has completely opened.
ASSEMBLING THE STROLLER
4• To mount the front wheels, lower lever A and slip the wheel
on as shown in figure B, pressing until it clicks into place.
5• To assemble the rear wheels fasten the wheels connected by
the break wire, as indicated in the figure.
6• Carefully distinguish the left wheel from the right, to fasten
the two rear wheels properly. The left wheel has a rib on
the wheel tube and one on the chassis to guarantee proper
fastening (see figure).
7• Make sure that it is fastened properly, as indicated in the
figure (click).
8• To mount the basket, slip the openings over the hooks in the
front (A) and the rear (B and C).
9• The figure shows the basket fastened to the stroller.
10•
The drink holder can be placed on the left or right hand
side of the stroller, thanks to the attachment which is
already fitted on both sides. To fit the drink holder, click it
on, as in Figure A. See Figure B for a fitted drink holder.
Do not put hot drinks in the drink-holder, nor items
EN•ENGLISH
DELL'ARTICOLO DEVONO ESSERE EFFETTUATE DA ADULTI.
• NON UTILIZZATE IL PRODOTTO SE PRESENTA PARTI MANCANTI O
ROTTURE.
• NON AGGIUNGERE MATERASSINI.
• PRIMA DELL’ USO ASSICURARSI CHE TUTTI I MECCANISMI DI
AGGANCIO SIANO AGGANCIATI CORRETTAMENTE.
• PRIMA DELL’ USO ASSICURARSI CHE IL SEGGIOLINO AUTO, LA
CARROZZINA O LA SEDUTA RIPORTATA SIANO CORRETTAMENTE
AGGANCIATI.
• EVITARE DI INTRODURRE LE DITA NEI MECCANISMI.
• PRESTARE ATTENZIONE ALLA PRESENZA DEL BAMBINO QUANDO
SI EFFETTUANO OPERAZIONI DI REGOLAZIONE DEI MECCANISMI
(MANIGLIONE, SCHIENALE).
• NON UTILIZZARE VICINO A FONTI DI CALORE, FIAMME LIBERE OD
OGGETTI PERICOLOSI A PORTATA DELLE BRACCIA DEL BAMBINO.
• POTREBBE ESSERE PERICOLOSO UTILIZZARE ACCESSORI NON
APPROVATI DAL COSTRUTTORE.
• CONTROLLARE REGOLARMENTE IL MANIGLIONE (O LE MANIGLIE)
ED IL FONDO DELLA CARROZZINA E VERIFICARE L'ASSENZA DI
SEGNI DI ROTTURA O DANNEGGIAMENTO.
• NELL'UTILIZZARE LA CARROZZINA CON UNO STAND, VERIFICATE
LA MASSIMA LUNGHEZZA DELLA CARROZZINA SPECIFICATA
SULLO STAND.