ISSUED: 03-24-09 SHEET #: 125-9056-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
1 of 2
Models: WSP816,
WSP816-W
Use a stud finder to locate stud centers. Use wall
plate (
A
) as a template to mark stud centers
through slots. Drill 3/4" (19 mm) dia. holes through
drywall and studs. Insert togglers (
E
) as shown
below. Six 1/4-20 x 2.5" phillips screws (
D
) and six
washers (
C
) are provided. Place screws (
D
) through
wall plate (
A
). Partially fasten the toggler (
E
) to the
back of the screw. Pivot ends of toggler (
E
) 90°.
• Make sure that mounting screws are anchored into
the center of the studs. The use of an "edge to edge"
stud finder is highly recommended.
WARNING
A
B
C
D
E
A
E
D
E
D
A
A
D
C
E
Installation and Assembly:
Metal Stud Wall Plate for FPS-1000 or SP850
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Maximum Load Capacity:
150 lb (68 kg)
D
E
A
C
Push toggler (
E
) through hole.
Pull screw (
D
) back until toggler (
E
) hits the inside of
the metal stud. Fasten all six screws (
D
) tight, until
wall plate (
A
) is flush with wall.
WSP816
WSP816-W
Description
Qty. Part #
Part #
A
16" wall plate
1
024-1047
024-2047
B
1/4-20 x 1/2 phillips head screw
4
510-9108
510-9108
C
1/4" flat washer
10 540-9440
540-9440
D
1/4-20 x 2.5 phillips head screw
6
520-9522
520-9522
E
toggler 6
590-1093
590-1093
Parts List
