Boiler Control Instruction & Operation Manual, Rev 1
Page
30
of 64
Setup & Tuning
Parameter Adjustment
Login to Adjust Parameters
Control operation may be tailored to suit the
application b y adjusting parameters. To a d j u s t
parameters select the CONFIGURE button located
on the Home screen.
Press CONFIGURE icon to review and
adjust all parameters.
Parameters are password protected to discourage
unauthorized or accidental changes to settings.
User login is required to adjust these settings.
Parameters are locked and login requirement is
shown when the padlock icon is closed.
•
Press the Lock icon to access password screen.
•
Use keypad to enter Password.
•
Press OK Key when complete.
Adjusting Parameters
Editing parameters is accomplished as follows:
Figure 19: Adjusting Parameters
white
Figure 18: Security System
Press the up/down arrows to
edit the value incrementally.
Press OK to confirm the
newly edited value.
Press Cancel to negate the
newly edited value and go
back to the original.
Press Clear to set the
edited value to zero.
Press this button to delete
the ones place digit of the
edited value.
Use the keypad to edit the
value of the parameter.