ISSUED: 07-08-05 SHEET #: 055-9430-1
Visit the Peerless Web Site at www.peerlessindustries.com
5 of 9
For customer service call 1-800-729-0307 or 708-865-8870.
3/8 -16 THREADED ROD
(NOT INCLUDED)
Attach projector mount assembly (
A
) to two 3/8-16 threaded rods (not included) using two 3/8-16 hex thin nylon-
insert locknuts (not included) as shown in
figure 1.1
or
figure 1.2
.
Skip to step 6.
A
Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
Installation to Extension Column
Screw projector mount assembly (
A
) onto extension column (sold separately) as shown in
figure 2.1
.
Note
: For
3/4" extension columns, reducer
ACC 913
will be required as shown in
figure 2.2
. Tighten swivel stop screw
against extension column or reducer using security allen wrench (
B
).
Note:
Swivel stop screw is used to jam
against threads of extension column or reducer to prevent any excess movement of projector mount assembly
(
A
). Do not overtighten screw; overtightening screw will damage threads making it difficult to separate products.
Skip to step 6.
1 1/2" EXTENSION
COLUMN
(SOLD SEPARATELY)
(UL LISTED EXT OR ADJ
SERIES)
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
3/8 -16 THREADED ROD
(NOT INCLUDED)
A
FRONT OF
MOUNT
FRONT OF
MOUNT
fig. 1.1
fig. 1.2
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
fig. 2.1
ACC 913
(NOT UL LISTED)
fig. 2.2
A
SWIVEL STOP SCREW
BACK OF
MOUNT
A
SWIVEL STOP SCREW
BACK OF
MOUNT
3/4" EXTENSION COLUMN
