1 of 2
ISSUED: 01-22-02 SHEET #: 200-9301-7 11-16-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
Two Instruction sheets are included with this product. Begin with this sheet.
Assembly Instructions - Adapter Bracket for Panasonic
®
42" Plasma Screens
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
PARTS LIST
PART #
QTY.
DESCRIPTION
AA
200-0213
1
adapter bracket
BB
590-1115
4
1/2" OD screw insulator
CC
590-1121
4
.52 ID x .8 OD x .5 H spacer
DD
520-1152
4
M8 x 40 mm socket pin screw
EE
540-9406
4
5/16 washer
FF
540-1002
4
.34 ID x .75 OD x .25 H washer
Parts List
Note:
Some parts may appear slightly different than illustrated.
AA
CC
BB
DD
EE
FF
FF
DD
EE
AA
DETAIL 1
BB
CC
EE
*Place four .52 ID x .8 OD x .5 H spacers (
CC
) inside recesses in back of plasma. Attach adapter plate (
AA
) to back of
plasma using four M8 x 40 mm socket pin screws (
DD
), four 5/16 washers (
EE
), and four screw insulators (
BB
) as shown in
figure 1 and detail 1.
*Note:
For a Panasonic
®
TH42PA2OUP plasma, place four .34 ID x .075 OD x .25 H spacers (
FF
) inside
recesses in back of plasma. Attach adapter plate (
AA
) to back of plasma using four M8 x 40 mm socket pin screws (
DD
) and
four 5/16 washers (
EE
) as shown in figure 1.1 and detail 2.
Tighten M8 screws (
DD
) using 4 mm allen wrench (provided with mount).
DD
DD
EE
BB
AA
AA
CC
Plasma
(cut out)
fig. 1
fig. 1.1
AA
DETAIL 2
Plasma
(cut out)
DD
FF
EE
Model: PAN42
• Do not overtighten. Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
