background image

 

 

 

To use the lavalier mic, attach it at chest level or higher.  Do not place it too close to the mouth – 

 

a distance of about six inches is recommended.  To use the headset mic, place it on your head 

 

and adjust the boom so that the mic is about one inch to the side of the front of the mouth.  As the 

 

microphone cord also serves as the antenna, be sure to extend it fully.  Rolling up or shortening 

 

the cord may reduce the effective operating range – keep it as straight as possible. 

When ready to speak, slide the OFF/STANDBY/ON SWITCH (26) to the ON position.  Adjust the 
volume of the receiver as per the Audio Output Microphone Connection section of the above UHF 
receiver instructions. 

[Note: Observe care in selecting P.A. volume, transmitter location and speaker placement so that 
acoustic feedback will be avoided.  Unidirectional mics are more resistant to feedback, but pick 
up sound equally from all directions, and are prone to feedback if not used carefully.  
Unidirectional mics are more resistant to feedback, but pick up sound sources best that are 
directly in front of the mic.  Also, mics that are farther from the sound source, such as lavaliers, 
require more acoustic gain and thus  more prone to feedback than close-source mics such as 
handheld or headset models that are used close to the mouth. 

The AF PEAK LED INDICTOR (3) on the UHF receiver will light for all loud input signals.   

 

 

Содержание PV 1 UHF













Отзывы: