– 5 –
59. Do not press the tool too hard against the workpiece. It is
not only inefficient but also may cause damages to the
tool.
60. Never lay the tool until the accessory has come to a
complete stop.
61. Do not abuse the tool. Do not throw, drop or shock the
tool.
62. Do not carry the tool by the air hose, and do not pull it to
disconnect at the same time.
63. Do not cover or block an exhaust. Blocked exhaust
obstructs the tool from working properly. Also, do not
direct exhaust air towards bystanders and/or animals.
64. Dress properly.
65. Do not wear loose fitting clothing or jewelry that could be
caught in moving parts.
66. Immediately stop operating the tool if you feel the
tool is not working correctly. If damaged, have the tool
serviced.
67. Stay alert, be careful while operating this tool. Do not use
tool while tired or under the influence of drugs, alcohol,
or medications.
68. Keep children and by standers at a safe distance from
work area.
69. Do not use tooling that could be hazaedous if it becomes
wet. (i.e.grinding stones)
70. Never place hand or face near a moving accessory.
71. Use only genuine Pearl replacement parts for repairs.
72. Always turn it off and disconnect from air compressor
before installing and removing accessories, before
adjusting or when making repairs.
73. Never use damaged accessories.
74. Wear personal protective equipment such as safety
glasses that conforms to NSI/ISEA Z87.1, and ear
protection that conforms to ANSI/ISEA S12.6.
75. Always securely clamp and support work piece.
76. Do not use damaged air hose.
77. Always wear proper respiratory protection. A dust mask
or similar dust respirator should be used.
78. Keep tools clean and lubricated.
79. Always disconnect tool when not in use, especially when
changing tools.
80. Inspect before using, check alignment of moving parts
and breakage or improper mounting.
81. Use the Pearl PA6000 for wet grinding only.
82. Only use a Backing pad rated for 5000 RPM or higher.
SPECIFIC WARNINGS FOR PA6000
1. Only qualified/trained operators should use this tool.
2. Use clamps etc. to secure and support the workpiece.
3. Use accessories made for pneumatic tools.
4. Hold the tool firmly, especially when starting.
CAUTION
1. Do not abuse the tool. Do not throw, drop or shock the
tool.
2. Do not carry the tool by the air hose, and at the same
time, do not pull it to disconnect.
3. Do not cover or block an exhaust. Blocked exhaust
prevents the tool from working properly. Also, never
direct exhaust air towards bystanders and/or animals.
4. Dress properly
5. Do not wear loose fitting clothing or jewelry that could be
caught in moving parts.
6. Do not cover or block exhaust. Blocked exhaust prevents
the tool from working properly.
7. Immediately stop operating the tool if you feel the tool is
not working correctly. If damaged have the tool serviced.
8. Stay alert, be careful while operating this tool. Do not use
tool while tired or under the influence of drugs, alcohol,
or medications.
SPECIFIC CAUTION FOR MAINTENANCE
1. Immediately stop operating the tool whenever you fell
that the tool is not working properly. If damaged, have the
tool serviced.
2. Use appropriate pressure. Excessively high pressure will
increase the number of revolutions or strokes causing
potential failure and accidental injury.
3. Use only identical replacement parts when servicing.
4. Do not store unused accessories and tools in an area
where temperature changes a lot and/or under the direct
sunlight. Store them in a dry area and out of reach of
children.
5. Inspect tool before use; check if parts and accessories are
free from damage.
6. Do not use damaged accessory.
7. Never use solvents or other harsh chemicals to clean the
non-metallic parts of the tool.
GENERAL SAFETY RULES AND PRECAUTIONS
