3.3 Check Operational Readiness
1. Open the Windows Start menu.
2. Type
Peak Settings
and press
|
Enter
|
.
The window
PEAK Settings
appears.
3. Select
CAN Hardware
.
The connected CAN interface is displayed.
3.3.1 Plug-in card is not listed
The PCAN-PCI Express card uses the PCIe standard 1.0. It may happen that the card is
not detected by the system. This may occur, when the PCIe standard on your system
is newer than "1.0" or when the card is in a PEG slot.
You can ensure correct recognition of the card by changing the settings in the
computer BIOS.
Make the following settings in the BIOS of your computer mainboard:
1. For the PCIe slot in use, set 1.0 for PCIe support.
Possible terms for the setting: Gen1, Legacy, 1.0
2. To use the card in a PEG slot, enable the “Early PCIe Delay” option.
The terms and availability of the above options may differ depending on
the mainboard used. Therefore, check the user manual of the
mainboard or contact the manufacturer.
3 Installation
PCAN-PCI Express
User Manual 4.0.0
© 2022 PEAK-System Technik GmbH
11
