PCAN-Router Pro FD – User Manual
33
3.
The firmware file (
*.bin
) is in the directory
\Hardware\PCAN-Router Pro FD\Datalogger\
.
4.
Proceed with the firmware upload as described in chapter 6
Firmware Upload on page 25.
5.
After a successful upload, proceed with the configuration
described in the next chapter.
7.2
Configuration
The firmware comes with a file named
config.txt
which can be
found in the same directory as the firmware. All settings of the CAN
channels and logging features are configured with this file.
Note:
If you update the data logging firmware to a new version,
please make sure to use the new configuration file as well.
Editing the file can be done with any common text editor but some
rules must be considered:
The configuration file is parsed line by line
Lines can have up to 190 characters
Comments are started with
//
and are ignored while parsing
The header of the configuration file must not be edited.
Especially the firmware version number must not be changed,
since the following configuration features are only processed, if
the correct firmware version is indicated
A configuration is started with a keyword followed by
=
and the
corresponding options or parameters
If a keyword is not written correctly or is not supported at all, the
line is ignored
