PCAN-Router Pro FD – User Manual
13
2.7
ID Rotary Switch
On the back of the PCAN-Router Pro FD housing is a rotary switch
for selecting an ID from 0 to F. The selected value can be read out
with a custom firmware.
Figure 6: Back side of standard product version (IPEH-002220)
Independent of the installed firmware, the CAN bootloader for up-
loading a firmware can be activated with the rotary switch position
F. The corresponding procedure is documented in chapter 6.2 on
page 25.
2.8
Status LEDs
When a power supply is applied, the power LED lights up
green
. All
other LEDs can be programmed with a custom firmware. More
details can be found in the supplied programming examples.
At delivery, the PCAN-Router Pro FD is programmed with the data
logger firmware. Its LED blinking patterns are described in chapter
7.4.1 on page 47.
