Peak IPEH-002210, Руководство пользователя

Страница: 23 / 37

PCAN-Router – User Manual
23
CAN interface of the PCAN series) this line may be applied to
the mass. Damage or destruction of the electronics is a possible
consequence.
4. Switch on the PCAN-Router by applying a supply voltage.
Due to the High level at the Boot connection, the PCAN-
Router starts the CAN bootloader. This can be determined
by the status LEDs:
LED State Color
CAN1 quickly blinking orange
CAN2 on orange
6.3 Firmware Transfer
On the PCAN-Router a new version of the firmware can be
transferred via both CAN channels. Only the bootloader can be
activated via the first CAN channel. The firmware is uploaded via a
CAN bus using the supplied Windows program PEAK-Flash.
Do the following to transfer a new firmware with PEAK-Flash
1. The software PEAK-Flash is included in the development
package, which can be downloaded via the following link:
2.
Open the zip file and extract it to your local storage medium.
3. Run the
PEAK-Flash.exe
The program opens.