Peak Scientific Precision Hydrogen 1200cc, Руководство пользователя

Страница: 36 / 40

Page 36
Troubleshooting
Problem Possible Solution
The Generator will not switch on and the
power switch does not illuminate
• Ensure power cord is plugged into the
Generator and that the power socket is
turned on.
• Check the fuse in the power cord
plug.
• Contact your service provider.
Diagnostics Failed Alarm • Contact your service provider.
Cell Over Voltage Alarm • Contact your service provider.
Over Pressure Alarm • Contact your service provider.
Capacity Excess Alarm
• Check external pipework for leaks.
• Contact your service provider.
Water Level Fault • Contact your service provider.
Low Water Supply Alarm
• Check water supply level and fill if
necessary.
• Contact your service provider.
Hydrogen detected* • Check for external leaks.
The generator is not producing hydrogen
• Check the Customer Set Pressure is higher
than 1PSI
• Contact your service provider.
The generator is not producing the required
amount of hydrogen at the set pressure.
• Check the water quality of the external
supply.
• Contact your service provider.
* If Hydrogen Detector is fitted.