Peak Scientific Precision Hydrogen 1200cc, Руководство пользователя

Страница: 28 / 40

Page 28
WARNING
Electrical Connection
Connect the generator into an appropriate voltage supply between 100-230VAC, refer
to the generator serial plate for input specification and ensure your supply matches the
requirements.
If the appropriate power cord is not supplied; a new CSA, UL approved power cord,
rated to at least 10 amps, can be fitted by a qualified electrician.
This unit is classified as SAFETY CLASS 1. THIS UNIT MUST BE
EARTHED. Before connecting the unit to the mains supply, please
check the information on the serial plate. The mains supply must be of
the stated AC voltage and frequency.
EARTH/GROUND (E):- Green & Yellow or Green
LIVE (L):- Brown or Black
Neutral (N):- Blue or White
Electrical requirements are 100-230VAC nominal. However, running continuously at
voltages outwith this is not recommended. Extended periods at extremes can have a
detrimental effect on the operation and life of the generator.
If a substitute main supply cord is used, ensure that it has adequate rating. Failure to do
so could cause damage to the generator.