Peak Scientific Precision Hydrogen 1200cc, Руководство пользователя

Страница: 18 / 40

Page 18
Fittings Kit Contents
Supplied in the Fittings Kit are all the fittings required to connect the generator to the
application. The contents of the Fittings Kit are as follows:
1. Tygon Tubing x 1m
2. Teflon Tubing x 1m
3. Deioniser Column Resin Refill x 1
4. Barbed Hose Fitting x 1
5. UK Mains Power Cable x 1
6. EU Mains Power Cable x 1
7. US Mains Power Cable 110v x 1
8. US Mains Power Cable 230v x 1
9. Installation Guide– Precision Hydrogen x 1
10. 4 or 8 Litre Water Bottle** x 1
11. Transit Plugs x 2
**Optional Extra, Includes additional Barbed Hose Fitting
All of the generator output ports are located on the rear of the generator.
Unpacking Instructions
The generator weight constitutes a two person lift and as such, safe lifting practices
should be employed; do not attempt to lift on your own, as you will significantly increase
the chance of injury & damage to yourself and others around you.
1. Remove the packing straps and lift the lid upwards.
2. Next remove the fittings kit tray and the outer cover that makes up the main box of
the packaging.
3. Next, with someone on either side of the unit, position your hands underneath the
unit ready to lift.
4. Ensuring your knees are bent and your back is straight, lift the unit to the desired
location.