NM20ZA Service Manual Rev 14
NM20ZA
Service Manual – Revision 13
1.
Small Compressor: -
The filter is located on top of the compressor facing towards the rear
as shown below.
The cover is removed by twisting it ¼ turn
and puling clear. The element simply lifts out.
Part Number 02-4187.
Re-assembly is the reverse procedure
2.
Large Compressor: -
The filter is located on the tray at the left hand side towards the front.
The cover is removed by twisting it ¼ turn
and puling clear. The element simply lifts out.
Part Number 02-4187.
Re-assembly is the reverse procedure
Once the filters are replaced, carefully slide the tray back into place ensuring that the power cables and
silver braided hoses are clear of all obstructions. Re-fit the 8-off screws ensuring they are properly
tightened to prevent vibration.
Inlet Filter
Small Compressor
Inlet Filter
Large Compressor
15
