9
Removal of Transit Bracket
Remove Rear Panel as follows:-
At the rear of the unit, turn the key in the lock
anti-clockwise to unlock the rear panel. Hold
the rear panel by the two handles and slowly swivel
the bottom of it out and lower it until the top
comes free from the chassis. Disconnect the
plug at the LHS so that the rear panel can be
completely removed.
Disassemble Transit Bracket as follows –
• Remove Screw 1 holding two pieces of transit bracket together.
• Remove Screws 2,3,4,5,holding the Transit Bracket to the Compressors
• Remove Screws 6,7 holding the Bracket to the internal side panels.
• Remove transit bracket from unit.
Re-fit the rear panel in reverse order of removal.
Important Note:
The Transit Bracket must be removed prior to switching the unit on. Failure to
do so will result in damage to the equipment.
The Generator can now be moved to its final location on the castors provided.
Note: - Included with the Generator is a pack containing hex key, manuals, fittings.
Be careful not to discard these with the packing.
Please save the product packaging and Transit Bracket for storage or future
shipment of the compressor.
Installation
Nitrogen N*10DR Nitrogen Generator
6 2 3 1 4 5(Hidden) 7(Hidden)
UM – N*10DR – Rev 4
