Infinity 9000
User Manual
Page 11
2014 © Peak Scientific - Rev. 2 - 28/05/14
Maintenance Schedule
Servicing and/or repair of the Generator should only be
undertaken by a TECHNICALLY COMPETENT PERSON with
the Generator in a safely isolated condition.
Due to the simplicity of the design and the small number of moving parts, the
Infinity 9000
Nitrogen Generators will have a long and trouble free life.
However as with all scientific and technical equipment it should be regularly
inspected and serviced as below.
Service Schedule
As an alternative to purchasing the 12 month service items individually an
Annual Service Kit is available as one part number. This contains all the filters
required for this Generator.
Safely Isolated Condition
The unit is in a safely isolated condition when it is disconnected from its
application and fully de-pressurised. Directions for isolating the Generator are
shown below.
Failure to place the Generator in a safely isolated condition
when instructed to do so may lead to personal injury or injury
to others and even death.
a)
Disconnect from air supply.
b)
Ensure the output pressure gauge read zero. (If gauge does not fall to
zero, loosen the outlet fitting slightly to allow trapped gas to escape).
Disconnect from the application.
Service interval
Component
Part No.
Qty.
12 months
Element Active Carbon
00-0046
1
Element 0.01 micron
00-0045
1
RAC Filter Element
00-0041
1
Purchase Interval
Component
Part No.
Qty.
12 months
Annual Service Kit
08-0316
1
