Infinity 9000
User Manual
Page 10
2014 © Peak Scientific - Rev. 2 - 28/05/14
Commissioning
With the Generator installed as previously described, open the air supply to the
unit. The Generator has been pre-set in the factory to give the specified output
flow-rate and pressure. On reaching operational pressure the Generator will
produce Nitrogen.
The design of the generator is such that it will deliver up to the rated output
flow of Nitrogen at 100 psig (6.7 barg). Flow at any time is determined by
demand of the consuming equipment. In circumstances of no demand, the
generator remains operational and will provide nitrogen immediately as
demand resumes.
Pressure & Flow Settings
The above settings should allow the generator to be operated with all standard
configurations of instruments. Should the above settings not provide sufficient
flow or pressure for your application please contact Peak Scientific for
assistance.
Generator
Flow/Pressure
Infinity 9000
34l/min @ 100psig
