Peak Scientific Corona CA, Руководство по обслуживанию

Страница: 13 / 25

Corona CA Service Manual
Page 13
Compressor Inlet Filter Replacement
Ensure that Generator is in Safely Isolated Condition
1. Remove the filter lid by turning it clockwise
and pulling upwards
2. The filter element is fitted into the filter
lid. Pull it out and clean the inside of the
lid before fitting a replacement filter
element into the lid.
3. Clean the filter bowl (situated inside of
the unit) and then re-fit the lid (including
attached filter element) to the filter
housing, turning it anti-clockwise to lock
it in position.