ProGrip Circular Saw Plate
Instruction Manual For
Part # 600 /605
CAUTION:
Please read, understand, and follow all manufactur-
ers instructions, guidelines and owners manuals that
come with your power tools. Peachtree Woodworking
Supply, Inc. and its subsidiaries assume no liability
for accidents or injuries caused by improper use of
this product.
The ProGrip System Saw Base gives you total control for straight-line action. Attaches to your
Saw with fasteners supplied by you depending on the saw plate thickness. This UHMW plastic
base provides smooth long lasting service.
Saw Mounting Instructions
Step 1
Unplug and remove saw blade from the saw.
(See Figure 1)
Figure 1
NOTE: BE SURE TO UNPLUG YOUR SAW
Using The ProGrip Saw Base
The UHMW Saw Base can be use on any length ProGrip Straight edge clamp. The base can be
used on either the right or left side of the clamp to make straight cuts with your saw.
If your Pro-Grip Saw Base comes with locking knobs leave the locking knobs loose enough so
the base will slide smoothly though its full travel.
This Instruction Manual is a general set of instruction
for mounting a circular saw on the Pro-Grip Saw Base
Plate and Pro-Grip Universal Plate. All circular saws are
not the same and some modification maybe required to
mount your saw. Please read the entire set instructions
before beginning.
