Cyclone for STMicro - User Manual
17
CYCLONE FOR STMICRO
3.14
Ribbon Cable
The Cyclone for STMicro communicates with STM8 targets through a keyed
4-pin ERNI cable assembly.
The Cyclone for STMicro communicates with SPC56 targets through a 14-pin
ribbon cable.
The Cyclone for STMicro communicates with STM32F targets through a 20-
pin ribbon cable.
All cables are designed such that the corresponding Cyclone for STMicro
Debug Connector has the same pin out as the corresponding Target Header,
i.e., Pin 1 of the Cyclone for STMicro Debug Connector is connected to Pin 1
of the Target Debug Header.
Both 14-pin and 20-pin ribbon cables have a 0.100-inch centerline dual row
socket IDC assembly (not keyed). Figure 3-13 sketches the connection
mechanism (looking down into the sockets) for the 14-pin ribbon cable. The
20-pin ribbon cable uses a similar scheme with more pins.
Figure 3-14: Ribbon Cable Diagram When Looking Into IDC Socket
3.15
Target Power Management
The Cyclone for STMicro provides four power management schemes. The
Содержание Cyclone for STMicro
