PDQ 6200 Series Скачать руководство пользователя страница 3

Страница: 3 / 6

2754 Creek Hill Road | Leola, PA 17540 | 800.441.9692 | www.pdqlocks.com

Batteries are located in exit device rail. For new

installations, connect wiring harness plug to exit

device trim before installing batteries.

INSTALLING / REPLACING

6EWS BATTERIES

2. LOCATING BATTERIES

Remove exit device rail insert by

sliding toward hinge side of door.

1. REMOVE END CAP

Remove exit device end cap

and set aside

3. INSTALL / REPLACE

BATTERIES

Install or replace the batteries.

Reinstall rail insert and end cap.

Содержание 6200 Series

Страница 2: ...0 441 9692 www pdqlocks com INSTALLING 6EWS TRIM WITH 6200 SERIES EXIT DEVICE 4 CONNECT WIRE Attach wire harness connectors as shown Push excess wire into door cavity 5 INSTALL CHASSIS COVER Re install chassis cover using 4 flat head screws ...

Страница 3: ...ing harness plug to exit device trim before installing batteries INSTALLING REPLACING 6EWS BATTERIES 2 LOCATING BATTERIES Remove exit device rail insert by sliding toward hinge side of door 1 REMOVE END CAP Remove exit device end cap and set aside 3 INSTALL REPLACE BATTERIES Install or replace the batteries Reinstall rail insert and end cap ...

Страница 5: ... easily field handed It is simply necessary to point the lever in the correct direction and insert the 8mm drive spindle HANDING TRIM 2 INSERT SPINDLE Insert square 8mm spindle until c clip is against face of hub 1 SET HANDING Rotate lever to correct location for handing of door ...

Страница 6: ...2754 Creek Hill Road Leola PA 17540 800 441 9692 www pdqlocks com ...