WaveStar Color Monitor_____________________________________________________________
Ctrl Nr: PM375103 Revision: 003
26
A BCMS Data Acquisition Board
—the physical BCMS PCB— can have three BCMS devices with their
own points lists:
•
Panelboard 1 points list, BCMS (Normal), BCMS KWH, or BCMS IEC
•
Panelboard 2 points list, using the type of points list as for Panelboard 1
•
Subfeed points list for two subfeed circuits (This short points list is described at the end of
the BCMS Normal and BCMS KWH points lists, but when used is a separate list with its
own Modbus address.)
Each BCMS device gets its own device entry in the Monitor’s device chain, its own points list, and its
own Modbus address.
4.2.5
BCMS IEC Settings
IEC panelboards with up to 72 individual circuits use the BCMS IEC points list. The initial generic
device type is BCMS IEC. Settings are only Device Name and Software Version.
Touch
BCMS IEC device name
in
DEVICES
list.
Device name turns blue when selected.
Available Settings
Touch
NAME
box to bring up keyboard where you
can enter the
Device NAME
(up to 16 characters).
The device name is propagated to the header and
device list.
Device name should be unique, so that alarms can
be associated with a specific device.
Set version: Touch
VERSION
box to enter
software versions. Keyboard appears requesting
password and then requests that you enter the
version code (enter “VNUP”).
Figure 21 Settings: BCMS IEC
