Your Source for Healthcare and
Wellness Infotainment
™
MODEL NUMBER:
PD168-103
Document Number:
PD196-083R4
Installation for 100mm VESA Compliant Wall Mounts
Page 1 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
SCOPE:
TO INSTALL A PD168-103 WALL MOUNT TO AN LED TV. THESE BRACKETS HAVE A STANDARD 100MM VESA
PATTERN AND WILL WORK WITH PDI E24LED TV AS WELL AS OTHER SETS THAT HAVE A 100MM VESA
MOUNTING PATTERN FOR USE WITH M4 SCREWS.
SAFETY STEPS:
1. ALWAYS WEAR SAFETY GLASSES/GOGGLES TO PREVENT INJURY FROM DEBRIS.
2. FOLLOW THE INSTALLATION /REMOVAL INSTRUCTIONS FOR YOUR EXISTING PRODUCTS.
TOOLS:
1. P1 OR P2 PHILLIPS SCREWDRIVER
2. 1/4" HEX BIT DRIVER
3. SAFETY GLASSES/GOGGLES
PROCEDURE:
STEP 1:
SELECT A LOCATION ON THE WALL APPROXIMATELY 9 INCHES BELOW THE CEILING. POSITION THE PD181-
697 (#1) VERTICAL MOUNT CLEVIS AND LOCATE THE TWO MOUNTING HOLES. SECURE THE BRACKET TO THE
WALL WITH APPROPRIATE WALL ANCHORS. (MOUNTING HARDWARE IS NOT INCLUDED)
STEP 2:
POSITION THE PD181-596 100MM VESA MOUNTING BRACKET (#2) ON THE LED TV CABINET. ATTACH WITH
THE (#4) M4 SCREWS PROVIDED.
PARTS LIST
ITEM
PART NUMBER
DESCRIPTION
QTY
1
PD181-697
VERTICAL MOUNT CLEVIS
1
2
PD181-596
100MM VESA MOUNTING BRACKET
1
3
PDIPPBHSCS103250
10-32 X ½ PILFER PROOF SCREW
2
4
PDIPPHMSM4X76
M4-.7 X 6MM PHILLIPS SCREW
4
5
PD219-020
TAMPER RESISTANT HEX BIT
1
6
PD218-001
8” TY-WRAP
2
* DRAWINGS DISPLAY BRACKETS MOUNTED ON A 100MM VESA COMPLIANT TV FOR REFERENCE PURPOSES.
