PDi medTV16, Руководство пользователя

Страница: 9 / 21

MODEL:
medTV
16
Document Number:
PD196-405R3
User Manual Page 9 of 21
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.pdiarm.com and www.mymedTV.com
▪ Phone 800.628.9870
3.
Press SETUP to return to the previous menu.
Maximum Volume
Sets the maximum volume level the TV can reach.
1. In Sound menu, press the CH▲ / CH▼ button to select Maximum Volume .
2. Press the VOL ◄ / VOL ► button to select your preferred maximum volume allowed.
3. Press SETUP to return to the previous menu.
Power on Volume
Sets the initial volume for the TV upon powering on. Once the TV is on, the volume can be set to any allowable level.
NOTE:
If
Power on Volume is set to LAST, and physical power is removed, the TV will power on with a volume of zero.
1. In Sound menu, press the CH▲ / CH▼ button to select Power on Volume .
2. Press the VOL ◄ / VOL ► button to determine your preferred volume when the TV turns on. Setting range is from 0 to
100 or LAST. Setting the level to LAST causes the TV to remember the last volume level used by the TV prior to turning
off.
3. Press SETUP to return to the previous menu.
Internal Speaker Enable
The speakers inside the TV cabinet can be Enabled (turned ON) or Disabled (OFF) for each TV Service Level and source.
Note :
Sound to the earphone jack remains on at all times.
1. In the Sound menu, press CH▲ / CH▼ button to select the Internal Speaker Enable menu item.
2. Press VOL ◄ / VOL ► to enter the menu.
3. Press the CH▲ / CH▼ button to select the desired Source.
4. Press VOL ◄ / VOL ► to select Disabled or Enabled or Vol Key Toggle.
5. Press SETUP to return to the previous menu.
Sound
■
Balance L 6
■
Minimum Volume 0
■
Maximum Volume 100
■ Power on Volume Last
■ Internal Speaker Enable ►
■
Volume Leveling
►
■
Headphone Sound Mode Stereo
■
Pillow Speaker Boost Normal
Position:
▲▼
Exit: SETUP or LAST Next:
◄►
Internal Speaker Enable
Speaker
■
TV Enabled
■
HDMI Vol Key Toggle
Position: ▲▼
Exit: SETUP or LAST Next:
◄►
Volume Leveling
Volume leveling can be adjusted for TV input or HDMI. You can adjust the volume in 10 percent increments between 50% to 100%
for each source.
Headphone Sound Mode
The earphone jack sound can be heard with either a Mono (single ear) or Stereo (dual ear) style headset.
1. In the Sound menu, press CH▲ / CH▼ to highlight Headphone Sound Mode .
2. Press VOL ◄ / VOL ► to choose between settings.
3. Press SETUP to return to previous menu.