MODEL:
medTV
16
Document Number:
PD196-405R3
User Manual
Page 10 of 21
PDi Communication Systems, Inc.
▪
40 Greenwood Ln
▪
Springboro, Ohio 45066 USA
Phone 800.628.9870
Pillow Speaker Boost
For units having the OPTIONAL Pillow Speaker controls, the Pillow Speaker Boost is set to Disabled for default setting. You can
choose from Normal, Strong, or Disabled settings for volume boost using an analog pillow speaker.
CHANNELS
The Channels menu allows you to program different signal sources or select from three Service Levels (Free, Basic, or Premium).
Only one service level is usable at a time. Each Service Level contains a different channel map. It also allows you to block channels,
TV programs, movies, and auxiliary sources that can be input to the TV (See Parental Control).
Signal
1.
Press the SETUP button on the PD108-420 remote
control.
2.
Press CH▲ or CH▼ to highlight
Channels
.
3.
Press VOL► to enter the Channels sub
-menu.
4.
Four different tuning types are available depending
upon the healthcare facility’s signal type. Selection of the
correct signal type is required for the TV to recognize all
possible channels and before any channel programming can
begin.
5.
Enter the Channels menu.
6.
Highlight
Signal
.
7.
Press VOL ► to select
Air, Cable STD, Cable IRC,
or
Cable
HRC
.
NOTE:
Most hospitals use the Cable STD signal
style.
Channel Sequence
This allows you to set the order in which the channels are
displayed after searching.
1.
From the Channels menu, press the CH▼ button to select the
Channel Sequence
menu item.
2.
Press ◄VOL► to set the Channel Sequence in which the channels are displayed after searching.
Interleave A+D:
In the order of channel number regardless of the system.
All A then D:
Digital channels are displayed after all analog channels.
3.
Press SETUP to return to the preceding menu.
Auto Program
The TV automatically scans each available channel for activity. Channels that display activity are memorized into the selected
Service Level.
1.
From the Channels menu, press the CH▼ button to select
Auto Program.
2.
In the Auto Program menu, press the VOL► button to select
Mode
.
3.
Press
VOL► to toggle to set the
mode of channel scanning: Analog Only, Digital Only, or Analog and Digital.
4.
Press the CH
▲
/
CH ▼ button to select the service level you wish to program (Free, Basic or Premium). The menu displays
the current programming status of each level as either Programmed o
r Blank. Press the VOL► to choose the service level.
NOTE:
Free service level is automatically programmed with Analog channels 1-125. A Programmed service level can be
reprogrammed if desired.
5.
Confirm Auto Program - A confirmation menu will appear before
proceeding. Press CH▲ to select YES and start auto
programming. The TV will now search all available channels with an on-screen progress percentage displayed. Once
complete, press SETUP to return to normal TV viewing.
NOTE
:
Any tuning mode that includes Digital channels will require several minutes to complete the auto programming.
Channels
■
Signal
Air
■
Channel Sequence
All A then D
■
Auto Program
►
■
Auto Channel Alias
►
■
Configure Channels
►
■
Clear Service Level
►
■
Copy Service Level
►
■
Parental Control
►
■
Power on Channel
►
■
Channel Lock
Disabled
■
CH Mem Override/Auto Ch
Update
Disabled
Position:
▲▼
Exit: SETUP or LAST
Next:
◄►
