MODEL:
med
TAB
19D/
med
TAB
16D
/
med
TAB
14D
Document Number:
PD196-434R1
User Manual
–
medTAB
®
with GENiO
™
Page 20 of 21
PDi Communication Systems, Inc.
▪
40 Greenwood Ln
▪
Springboro, Ohio 45066 USA
Phone 800.628.9870
ADVANCED OPTIONS
–
FEATURES
From the TV app:
1.
Select Settings. Enter Password (See pg. 10 for default password)
2.
Select Advanced Option
3.
Select Features
Input Sources
The TV’s signal sources can be individually Enabled or Disabled. The available sources in
this menu correspond with the components yo
u have connected to the TV’s connectors.
Change the source status to either
Disabled
or
Enabled/APO
(Auto Power Off) or
Enabled/No APO
(No Auto Power Off).
NOTE: Please disable all TV sources that are not to be used. A TV that is switched to a non-connected source generates
nuisance hospital maintenance calls of TV Not Working, when in fact the TV does work, but has been set to an inactive
source.
For Bella operation, HDMI input must be enabled for Set-Top-Box HDMI Video/Audio.
Auto Power On/Lock
This toggle switch will allow the TV to remain on whenever electrical power is applied to the set. The feature is useful for
controlling the TV from a wall switch or preventing the TV from being turned off by the TV power button or the remote control.
Bed A/B/C/D
The TV can be controlled by a patient IR remote. The TV offers selectable codes Bed A, Bed B, Bed C, and Bed D for independent
control of a single television in a multi-television room.
NOTE:
The patient remote can be toggled between Bed A, Bed B, Bed C, and
Bed D codes by using a paperclip to press the CODE button on the remote.
Closed Caption
Modify closed caption settings here. Set Closed Captioning to On, Off or On When Mute. Use Power On CC Mode menu item to set CC
to Off or Last.
Channel to Other Sources
By enabling this setting, patient can access enabled sources by channeling up or down at the end or beginning of the channel map.
To enable, slide toggle to the right or ON position.
For Bella operation, “
Channel to Other Sources
” must be enabled for the HDMI Video/Audio source. Otherwise, the “TV/AV” button
will need to be pressed on the PDI remote.
Power On ARC MODE
Change from the default 16:9 to 16:9 Panorama, 14:9, 4:3, or Last
Power On Source
Set source to use when TV powers on. Choose from Last, TV, HDMI1 or HDMI2.
Analog Pillow Speaker
Toggle switch to turn On/Off analog pillow speaker controls.
ADVANCE OPTIONS
–
SYSTEM
Find useful information about your device and manage cloning and firmware
From the TV app:
1.
Select Settings. Enter Password (See pg. 10 for default password)
2.
Select Advanced Option
3.
Select System
