© 2008-2011 PCT International, Inc.
All rights reserved. PCT.IS.AMP-MA.V2.201101
w w w . p c t i n t e r n a t i o n a l . c o m
2260 W Broadway Rd | Mesa, Arizona 85202-1898 | USA
Tel +1.480.813.0925 | Fax +1.480.545.1080 | [email protected]
C. FOR REVERSE POWERING
(OPTION 2)
1. Connect an F-male connectorized RF
coaxial cable between the port
“
RF OUT /PWR IN
” on the drop
amplifier and the “
TO AMP
” port on
the power inserter (PCT-MPI-1G).
2. Connect the F-male connectorized
RF coaxial cable to the power
adapter and the “
DC IN
” port on the
power inserter.
3. Connect the F-male connectorized
RF coaxial cable from the “
TO TV
”
port on the power inserter to
distribution network.
4. Connect the power adapter to AC
voltage source
With Power Inserter
NOTES:
This guide covers 1, 2, 4, and 8 port models. Images shown are of a 4-port amplifier.
PCT multimedia drop amplifiers can be ordered with or without a PCT-MPI-1G power inserter. If a power inserter is
required, it can be ordered separately. Please contact your local PCT sales office or representative for details.
Optional
Power Inserter
PCT-MPI-1G
INSTALLATION GUIDE
MULTIMEDIA DROP AMPLIFIERS
PCT-MA-B-xx / PCT-BEMA2-xx / PCT-NEMA2-xx / PCT-MA2-xx / PCT-MA210-xx
1, 2, 4, and 8 Ports
Ver-2 20110106
A. GENERAL INSTRUCTIONS
(OPTIONS 1 & 2)
1. Install type F-male connectorized
input coaxial cable to the “
RF IN
”
port.
2. Install type F-male connectorized RF
coaxial cable to the “
RF OUT
” port.
3. Verify AC voltage rating of power
source conforms with AC/DC
adapter.
4. Minimum power requirements
Active Return:
400 mA **
Passive Return: 250 mA
** Warning – Using a 250 mA power
adapter to power an active return
amplifier may result in:
a.
Interference from hum, and
b.
Overheating and premature failure
of the power adaptor.
B. FOR STANDARD POWERING
(OPTION 1)
1. Connect F-male connectorized RF
coaxial cable between
“
PWR IN
” port on the drop amplifier
and power adapter F-type
connection.
2. Connect the power adapter to AC
voltage source.
Without Power Inserter
© 2008-2011 PCT International, Inc.
All rights reserved. PCT.IS.AMP-MA.V2.201101
w w w . p c t i n t e r n a t i o n a l . c o m
2260 W Broadway Rd | Mesa, Arizona 85202-1898 | USA
Tel +1.480.813.0925 | Fax +1.480.545.1080 | [email protected]
C. FOR REVERSE POWERING
(OPTION 2)
1. Connect an F-male connectorized RF
coaxial cable between the port
“
RF OUT /PWR IN
” on the drop
amplifier and the “
TO AMP
” port on
the power inserter (PCT-MPI-1G).
2. Connect the F-male connectorized
RF coaxial cable to the power
adapter and the “
DC IN
” port on the
power inserter.
3. Connect the F-male connectorized
RF coaxial cable from the “
TO TV
”
port on the power inserter to
distribution network.
4. Connect the power adapter to AC
voltage source
With Power Inserter
NOTES:
This guide covers 1, 2, 4, and 8 port models. Images shown are of a 4-port amplifier.
PCT multimedia drop amplifiers can be ordered with or without a PCT-MPI-1G power inserter. If a power inserter is
required, it can be ordered separately. Please contact your local PCT sales office or representative for details.
Optional
Power Inserter
PCT-MPI-1G
INSTALLATION GUIDE
MULTIMEDIA DROP AMPLIFIERS
PCT-MA-B-xx / PCT-BEMA2-xx / PCT-NEMA2-xx / PCT-MA2-xx / PCT-MA210-xx
1, 2, 4, and 8 Ports
Ver-2 20110106
A. GENERAL INSTRUCTIONS
(OPTIONS 1 & 2)
1. Install type F-male connectorized
input coaxial cable to the “
RF IN
”
port.
2. Install type F-male connectorized RF
coaxial cable to the “
RF OUT
” port.
3. Verify AC voltage rating of power
source conforms with AC/DC
adapter.
4. Minimum power requirements
Active Return:
400 mA **
Passive Return: 250 mA
** Warning – Using a 250 mA power
adapter to power an active return
amplifier may result in:
a.
Interference from hum, and
b.
Overheating and premature failure
of the power adaptor.
B. FOR STANDARD POWERING
(OPTION 1)
1. Connect F-male connectorized RF
coaxial cable between
“
PWR IN
” port on the drop amplifier
and power adapter F-type
connection.
2. Connect the power adapter to AC
voltage source.
Without Power Inserter
