Pco Edge 3.1, Руководство пользователя

Страница: 46 / 59

46
VISION POINT SOFTWARE A4.3.5
After the installation is finished, open the Vision Point software and
check the hardware information.
First click
Create new project
Take a look at the
Project tab.
Click Frame Grabber
→
Hardware Information
Check the following values:
•
Firmware version:
≥
4.017
•
PCIe generation: 3 (see
Note
)
•
PCIe lanes: 8
Grabber firmware must be updated if version is smaller than 4.017,
see chapter
A4.3.8 .
PCI Express Generation 2 / 3
If the grabber is installed in a PCIe Slot with only Gen2 capability
and/or with only 4 PCIe lanes, memory bandwidth for image transfers
is limited and images might be lost.
Vision Point software will give you a hint, if your system has
limitations:
NOTE